84" 3-Point Hitch Snow Blower for 30-100HP Tractor, CAT 1 & 2, 24" Impeller Diameter, Manual 360° Snow Chute, Snow Shovel for JAM Clearance and PTO Shaft with Clutch Included, TSB84

The Farmry TSB84 combines an 84-inch clearing width, a serrated steel auger, and a 24-inch impeller in a rear-mounted snow blower. Its 360-degree chute, adjustable deflector, and replaceable cutting edge support snow removal along driveways, farm lanes, and open parking areas. When choosing an 84-inch PTO snow blower, consider access width, tractor capacity, and space for maneuvering—not clearing width alone. Compare Farmry rear PTO snow blowers, or use the 60-, 72-, and 84-inch snow blower guide to narrow your choice.

Yes, with surface-appropriate setup and operating conditions. The adjustable skid shoes help set clearance between the blower housing and the ground. On gravel driveways, sufficient clearance helps limit stone pickup; on asphalt or concrete, adjustment should account for uneven sections and raised edges. Skid shoes do not guarantee a scratch-free surface or prevent every piece of debris from entering the machine. Review the PTO snow blower gravel-driveway guide, and follow the applicable operator’s manual rather than using one setting for every surface.

The listed standard configuration includes a PTO shaft with clutch, a manual 360-degree chute, and a snow clean-out shovel. Electric and hydraulic control options are available, but standard equipment, optional upgrades, and promotional gifts should be checked separately before ordering. The electronic chute rotator and deflector kit lists the TSB84 as a compatible model. Confirm installation requirements and included components; do not assume a kit arrives preinstalled. The snow blower chute-control comparison explains the differences between manual, electric, and hydraulic options.

Yes, the TSB84 is designed to process snow using its auger and impeller, but wet snow, deep accumulation, and compacted material can increase the load. Ground speed and the amount of snow entering the blower must suit the conditions and available tractor power. Do not expect the same throwing distance or clearing pace in every storm, and do not treat heavy-snow capability as permission to process solid ice or hidden debris. Follow the model’s operating instructions and contact Farmry if you need help assessing your tractor and typical snow conditions.

Fit depends on more than the hitch category. The TSB84 3-point snow blower lists Category 1 & 2 mounting, 540 RPM PTO operation, and ASABE quick-hitch compatibility. You must also confirm tractor power, lift capacity at the relevant load center, ballast, hook engagement, and PTO driveline clearance. Adding a quick hitch can change the connection geometry, so shaft fit must be checked with the actual setup. Review the PTO snow blower quick-hitch guide. This is a rear-mounted implement; quick-hitch compatibility does not make it a front-loader attachment.