48" 3-Point Hitch Snow Blower for 15-35HP Tractor, CAT 1, 20" Impeller Diameter, Manual 360° Snow Chute, Snow Shovel for JAM Clearance and PTO Shaft with Clutch Included, TSB48

No. Category 1 is not only the hitch connection requirement. Your tractor also needs 15-35 PTO HP and a 540 RPM PTO, plus suitable rear lift capacity for the blower’s 595-lb net weight and installed configuration. Check load position, driveline clearance and required ballast, not just engine horsepower. Our snow blower lift-capacity guide explains the additional checks.

It depends on your tractor’s outside rear-tire width and clearing route. Compare the width across the outside edges of the rear tires with the blower’s usable clearing width; check overall dimensions separately for gates and storage. A wider blower is only appropriate if your tractor can power and carry it. Compare rear PTO snow blower sizes before ordering.

Yes. A quick hitch changes the tractor-to-implement spacing, so a shaft that connects may still have insufficient overlap or inadequate clearance when compressed. Check shaft length and interference throughout permitted hitch travel, following the manual’s shutdown and support procedures. The included shaft is not automatically ready for every tractor. See our PTO snow blower quick-hitch guide.

Do not set it to scrape loose gravel bare. Adjust both skid shoes to leave clearance above loose stones, and inspect the route before work. Skid shoes help reduce stone pickup but do not eliminate thrown-debris risks. Keep discharge away from people and property. Our gravel-driveway setup guide explains surface-specific precautions.

Yes. The optional electronic chute rotator and deflector kit fits the TSB48 and uses 12-volt electrical power instead of tractor hydraulic remotes for those functions. It adjusts chute direction and deflector angle. The kit is sold separately from the standard manual configuration; confirm the electrical supply, wiring and control placement for your tractor.