3-Point PTO Stump Grinder PRO, Two Torsion Springs, Speed Indicator, 34 Carbide Teeth, for 15-45HP Tractors, PTO Shaft Included with Slip Clutch. SG24Pro

Stump grinding and removal are professional stump grinding services designed to eliminate the leftover tree stump after a tree removal or tree trimming job. The stump grinding process uses a powerful stump grinder machine to grind the stump into small chips or mulch at ground level, leaving the soil ready for replanting or landscaping. Stump removal services, on the other hand, dig out the entire stump and root system, which can be more labor intensive but ensures the tree’s roots are completely gone. Both methods prevent tripping hazards, pests, and unwanted regrowth in your yard or garden.

A PTO stump grinder like the SG24 PRO is designed to match compact and mid-sized tractors. Specifically, it connects to tractors with pto hp 15–45 and a Category I 3-point hitch or ASABE quick hitch. This wide compatibility range means it can be paired with smaller homestead tractors as well as larger utility models used by landscaping crews or municipal grounds teams. By working at 540 RPM with an independent PTO system, the SG24 PRO ensures you get professional-level grinding performance without overloading your tractor.

In most cases, stump grinding is the more cost-effective method. Grinding the stump down to ground level with the right equipment is faster, less labor intensive, and leaves behind wood chips produced by the grinder that can be spread as mulch or used for fill. Full stump removal requires heavy equipment, digging, and hauling away the trunk, root system, and debris—making it more expensive. If your goal is simply to remove stumps for safety, lawn mower access, or landscaping, the grinding process offers the best balance of price, speed, and results.

A stump grinder is dangerous equipment built to grind the stump and surrounding roots into small pieces of wood. These machines come in different sizes—from compact units for residential yards to heavy equipment for commercial stump removal services. Professional tree stump removal experts use stump grinders to clear felled trees, prevent tripping hazards, and prepare the soil for new plants, grass, or garden projects. The wood chips produced during the grinding process are environmentally friendly and can be reused for mulch or soil improvement.

The depth of the stump grinding process depends on the job and the equipment used. Professional stump grinding services typically grind the stump 6–12 inches below the surface, removing enough of the tree’s roots to allow soil, rocks, and dirt to fill the hole. This ensures the entire stump is reduced to small chips while creating a level surface for landscaping, planting, or lawn restoration. Grinding deeper may be recommended when dealing with large stumps, pines, or if replanting another tree in the same spot.

Yes. Before operating the stump grinder, the PTO driveline clutch spring height must be adjusted according to your tractor’s PTO horsepower. Proper adjustment helps prevent equipment damage and avoids work interruption.
Please refer to the product manual for the correct spring height values.